Bottlehead Forum
General Category => General Discussion => Topic started by: Deke609 on January 29, 2021, 07:21:43 PM
-
The kind you find on the back of some components for connecting chassis ground to something else (house ground or chassis ground of another component)? I need search terms for Mouser/Digikey.
I know I could just use a screw, banana jack, etc. but I'd like one of the dedicated posts that you tighten either by finger (knurled) or screwdriver. Just to be fancy :)
MTIA, Derek
-
Grounding post
-
Thanks, but I tried that and variants thereof with no luck. It turns up very large copper fixtures for creating a house ground on copper plumbing (which I may in fact buy to replace the cheap aluminum one in my house that is covered in galvanic corrosion - but that's a different problem).
So no luck, still stuck.
-
It's an uninsulated binding post.
-
Success! Many thanks PB.
cheers, Derek
-
Here is the one I used on my turn table preamp. This one is insulated, so you have greater flexibility in mounting it:
https://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-0103-001/?qs=%2Fha2pyFaduiRA8ZBA48hsHC7q%252BO%2F4UTog3cAE8OvmZFlczSJ%252BtSrDA%3D%3D (https://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-0103-001/?qs=%2Fha2pyFaduiRA8ZBA48hsHC7q%252BO%2F4UTog3cAE8OvmZFlczSJ%252BtSrDA%3D%3D)
Edit to add a somewhat fuzzy image
-
Thanks Eric. I went with a knurled version by the same company: http://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-2223-001/?qs=ALatB1zlu3DK4UDroTueLA%3D%3D (http://www.mouser.com/ProductDetail/Johnson-Cinch-Connectivity-Solutions/111-2223-001/?qs=ALatB1zlu3DK4UDroTueLA%3D%3D)
cheers, Derek