Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: bernieclub on March 02, 2021, 10:56:14 AM

Title: BeePre2 high filament voltage... [resolved]
Post by: bernieclub on March 02, 2021, 10:56:14 AM

Just completed the board installation and I'm getting 8.45VDC on two meters.   High voltage measured 267VDC.    Any ideas?   T.I.A.

Bernie

Title: Re: BeePre2 high filament voltage...
Post by: Paul Birkeland on March 02, 2021, 11:07:32 AM

  You are measuring the "Reg" pads, not the "DC" pads right?

Title: Re: BeePre2 high filament voltage...
Post by: bernieclub on March 02, 2021, 11:10:44 AM

Duh!   This is why you make the big bucks.   Voltages are correct.   Thanks