Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: RabidBlackSquirrel on April 04, 2021, 09:54:27 AM

Title: Very low sound right channel [resolved]
Post by: RabidBlackSquirrel on April 04, 2021, 09:54:27 AM

Greetings! Just finished my build, and my voltages seem a smidge high on a few terminals. Left channel sounds great, right channel is very, very weak. I can only really make it out if I unplug left. Here's some terminal voltages -

1 - 90
2 - 200
4 - 200
5 - 88
7 - 110
9 - 121

2 and 4 seem a smidge high? Both LEDs light up, both sides of both tubes light up, all resistance checks were spot on. Some pictures attached, where should I dive in to get the right channel up?

Thanks!!

Title: Re: Very low sound right channel
Post by: RabidBlackSquirrel on April 04, 2021, 11:11:33 AM

Well, I fixed it! In case anyone finds this thread - I re-flowed everything because why not. Terminals 2 and 4 dropped to a much more in spec 177 and right channel came alive!