Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: bernieclub on April 27, 2021, 01:53:34 AM

Title: BeePre mono input...
Post by: bernieclub on April 27, 2021, 01:53:34 AM

I'd like to get a mono input to both channels to do some output capacitor comparisons and I'm having trouble getting my source to output mono.   Can I simply jumper the center pins of the input jacks?  I have some V-Cap ODAMs in anticipation of upgrades and I'd like to give them a semi valid taste test.   Thanks!
Bernie

Title: Re: BeePre mono input...
Post by: Paul Birkeland on April 27, 2021, 04:48:20 AM

If this is BeePre 2, I would jumper the outputs of the balance pots.  If it's the BeePre 1, I would jumper the outputs of the volume pot.  Doing this will provide some impedance between the outputs of your sources that may be desirable.

Title: Re: BeePre mono input...
Post by: bernieclub on April 27, 2021, 07:50:06 AM

Thanks P.B., it's BP2...I'll jumper the balance pot.