Bottlehead Forum

Bottlehead Kits => Stereomour II => Topic started by: Herbertk on February 24, 2022, 11:56:35 AM

Title: Resistor change ?
Post by: Herbertk on February 24, 2022, 11:56:35 AM

Hi,

I just want to confirm a change, the manual says to use a 365ohm metal film "3650F" resistor on both sockets B and C.

While my kit shows these marked on the packing list I do not have these. I do have resistors measuring the same pic attached, I am assuming I should be using these ?

Title: Re: Resistor change ?
Post by: Doc B. on February 24, 2022, 12:10:30 PM

Yes.