Bottlehead Forum

Bottlehead Kits => Stereomour II => Topic started by: Knightstick on March 01, 2022, 09:19:27 AM

Title: DC upgrade
Post by: Knightstick on March 01, 2022, 09:19:27 AM

Hello, I've been working on my Stereomour today upgrading it with the DC Filament parts. I'm at the end installing the .13 ohm resistors. While putting one of them in I had the iron on it awhile, and the resistor turned a light brown. After adjusting it to attach it to the other terminal a small piece of the ceramic fell off. I see metal but no visible signs of burning on the metal.Thanks much for any help

Title: Re: DC upgrade
Post by: Paul Birkeland on March 01, 2022, 02:08:30 PM

It would take a ton of heat and effort to actually damage one of those, so I wouldn't be super concerned about overheating one.

Title: Re: DC upgrade
Post by: Knightstick on March 01, 2022, 03:22:56 PM

Thank you as always Paul.