Bottlehead Forum

Bottlehead Kits => Stereomour II => Topic started by: Herbertk on March 28, 2022, 01:36:52 PM

Title: Sanity check
Post by: Herbertk on March 28, 2022, 01:36:52 PM

I am building the Shunt regulator upgrade and at one point it asks you to the PN2907A transistors to the board.

The transistors I have look slightly different so before I solder them wanted to check if they are ok. The picklist also shows PN but I have JC2907AN43's :P

Here is a picture is this ok ?

Title: Re: Sanity check
Post by: Doc B. on March 28, 2022, 01:42:48 PM

Yup, that's what we are using right now.

Title: Re: Sanity check
Post by: Herbertk on March 28, 2022, 02:07:19 PM

Thanks!