Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Hilts on April 08, 2022, 09:39:10 AM

Title: Resistance check [resolved]
Post by: Hilts on April 08, 2022, 09:39:10 AM

For a terminal that requires infinity * is a reading of 0.500M ohms acceptable?

Title: Re: Resistance check
Post by: Thermioniclife on April 08, 2022, 10:05:44 AM

.5 mega ohms is 500,000 ohms so that's good.

Title: Re: Resistance check
Post by: Hilts on April 08, 2022, 10:42:32 AM

Thought it was OK but as it didn't read O/L I thought I'd better check.

Thanks for the help 👍

Title: Re: Resistance check
Post by: Doc B. on April 08, 2022, 11:33:11 AM

This is explained in the third paragraph of page 47 of the manual.