Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Immanence on April 29, 2022, 07:07:42 AM

Title: Voltage Check Issue - 7/8/9 measuring 155v [resolved]
Post by: Immanence on April 29, 2022, 07:07:42 AM

Posting a new thread, because a separate issue. Resistance passes checked. On to voltage check. Everything was good except for 7/8/9, which measured at 155v.

155v is too high for one, and I didn't get 0v out of 8. Which is again weird because there is no connection there. Could I have power running into the chassis itself?

Title: Re: Voltage Check Issue - 7/8/9 measuring 155v
Post by: Immanence on April 29, 2022, 08:41:31 AM

Okay, I reflowed some joints and ALL CHECKS ARE PASSING CONSISTENTLY. WOO.

I also tested with some nicer probes. I was really trying to alligator it, but I think the clamps I got are pretty sub-par. I have some nice tips from the DMM, tried those and got better readings.

Going to move on to listening test...

Title: Re: Voltage Check Issue - 7/8/9 measuring 155v
Post by: Immanence on April 29, 2022, 09:11:56 AM

Listening to Public Service Broadcasting - Go!

Seems appropriate.

Title: Re: Voltage Check Issue - 7/8/9 measuring 155v [resolved]
Post by: Mucker on April 29, 2022, 06:55:13 PM

Good job and enjoy!