Bottlehead Forum
General Category => General Discussion => Topic started by: rockdoc on November 12, 2022, 03:41:58 AM
-
Hi guys,
I know this one is retired, and I love my 45s and 2A3s, but I'm looking to build an EL84 amp, and should have gotten the Seductor kit when it was still available. Oh well......
Any chance I could get or buy a manual for this amp?
Thanks!
Stee T
-
Or, am I better off with one of the other popular SE EL84 amps, like RH84, etc?
Steve T
-
RH84 uses plate to grid local feeedback around the EL-84, as does Seductor. But Seductor is direct coupled and uses a pentode driver instead of a triode, which gives it quite a different character. It was clean-sounding, but I didn't think it had much of the Bottlehead sound - or the special character of the EL-84. Since then, I've learned more about these circuits, and I would do it differently today. (I'll continue to study these circuit ideas, since they do have some advantages.)
Quite a number of people have built the RH-84 and other RH amps, whereas only a few Seductors were ever sold. So you'd probably be better off to do the RH and check the DIYaudio and/or other forums for experience and help.
-
Thanks Paul!
Steve T