Bottlehead Forum
Bottlehead Kits => Eros Phono => Topic started by: Petricore on November 25, 2022, 07:25:30 AM
-
Hi all,
I have an Eros phono preamp I built a couple years back. I absolutely love the sound and have since it was built. I did the built myself and all of the tests at the end of the build passed. I have one issue, when I warm up the amp with the rest of my stereo on, I get a loud static, crackling, popping. If I warm it up before turning everything on I don't hear it, its only when its first turning on and I have the rest of the system on. I have it grounded to my power station.
Is this normal? Is there something I can do to troubleshoot it? I'm almost to the point where I want to replace it just to get rid of the issue, but I thought I'd come here and troubleshoot first.
Thanks!
-
Some noise during warmup wouldn't be out of the ordinary. What I would do to troubleshoot something like that is to hook it up to an old receiver with some cheap speakers attached, then poke around the circuit a bit with a wooden chopstick to see if I could set off those noises by poking anything in particular. Performing this test can help you find solder joints that aren't quite 100%.
-
Thanks for the advice. Anything I can try that doesn't involve a second stereo, just have the one at the moment. Also, I never hear this outside of warmup and there is a definite point where I can tell its warm and it just sits quietly after.