Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: ChrisEvo8 on April 15, 2023, 08:25:20 AM

Title: Instructions Crack w/mainline kit
Post by: ChrisEvo8 on April 15, 2023, 08:25:20 AM
Long story short, I bought my kit years ago lost it while moving, then recently found it.  The link to the PDF instructions I received in my order e-mail is broken for me now and I may just be an idiot, but I can't seem to find them on the site/forums. What is the best way for me to get a copy of the directions currently? I can call/provide my order details if needed. Thanks!
Title: Re: Instructions Crack w/mainline kit
Post by: Paul Birkeland on April 15, 2023, 11:45:51 AM
I would e-mail replacementparts(At)bottlehead(dot)com with your information and order numbers to request new manual download links. 

Also be aware that if you let your kits sit around in a humid area for years, I would also replace the LEDs with fresh ones.
Title: Re: Instructions Crack w/mainline kit
Post by: ChrisEvo8 on April 17, 2023, 05:58:31 AM
Will do thanks for the tip. It was stored inside an AC garage thankfully, but I will make sure to check all the components prior to install.
Title: Re: Instructions Crack w/mainline kit
Post by: Paul Joppa on April 17, 2023, 06:24:13 AM
Air conditioning increases the relative humidity, though not the absolute humidity. It may be worse than an unconditioned environment for the LEDs.