Bottlehead Forum

General Category => General Discussion => Topic started by: AudioDave on April 24, 2023, 01:34:07 PM

Title: John Swenson Squeezebox Touch Power Supply Design
Post by: AudioDave on April 24, 2023, 01:34:07 PM

My apologies up front if not appropriate to ask this here but I don't know where else to ask!  Years ago John Swenson posted online a design of his for a DIY power supply for the Squeezebox Touch.   All of the links I can find for this power supply all return a message of "No Redirect".   By chance would any of you Bottleheads happen to have a schematic of this power supply you would be willing to share?
Many thanks in advance!
Dave Harms

Title: Re: John Swenson Squeezebox Touch Power Supply Design
Post by: Deluk on April 25, 2023, 12:44:33 AM

Google gives lots of hits for Alt PSU's but can you get anywhere from this thread?
https://forum.bottlehead.com/index.php?topic=2664.0

Title: Re: John Swenson Squeezebox Touch Power Supply Design
Post by: AudioDave on April 25, 2023, 06:01:40 AM

I had previously read through all the messages in that thread.  When I try to access any of the links to Mr. Swensons power supply design I always get the result "No Redirect" which I assume means the link is dead.  The JPG files in the messages will not download correctly either.   The thread is full of great information, if only I could get the power supply schematic!
Thanks for your response
Dave

Title: Re: John Swenson Squeezebox Touch Power Supply Design
Post by: pboser on April 25, 2023, 08:46:29 AM

Wayback machine!
https://web.archive.org/web/20120229202628/http://johnswenson1.home.comcast.net/~johnswenson1/stereo/SB_5V.GIF

Title: Re: John Swenson Squeezebox Touch Power Supply Design
Post by: AudioDave on April 25, 2023, 10:08:04 AM

THANK YOU !!!!
Dave