Bottlehead Forum

Bottlehead Kits => Moreplay => Topic started by: denti alligator on December 31, 2023, 09:38:55 AM

Title: Raw B+ voltage
Post by: denti alligator on December 31, 2023, 09:38:55 AM

I just finished this test. I got a reading that started around 320 and went up little by little to around 324, then down a little, then back up. Should I assume everything is ok? (Incoming voltage is 123V)

Title: Re: Raw B+ voltage
Post by: hmbscott on December 31, 2023, 12:36:41 PM

When I built mine it measured about the same, 321 - 324 VDC in my case. I have a similar line voltage; it varies between 120 and 125 VAC. I assumed it was fine and completed the build with no issues.

Title: Re: Raw B+ voltage
Post by: denti alligator on December 31, 2023, 06:29:57 PM

Thanks. From other posts here I assume it’s ok. Happy New Year everyone!