Bottlehead Forum

Bottlehead Kits => Mainline => Topic started by: N72826 on May 21, 2024, 06:33:42 AM

Title: Help with final voltage check
Post by: N72826 on May 21, 2024, 06:33:42 AM

Hello,

I'm conducting the final voltage check and some of them are off.

+275vDC on the Power Supply Board: 266V / expected: 275V
+6.3vDC on the Power Supply Board: 58.5V / expected: 55-65V
-6.3vDC on the Power Supply Board:  52.3V / expected: 50-60V
IA on the A side C4 S Board: 266V / expected: 275V
IA on the B side C4 S Board: 265V / expected: 275V
Breg Regulator Board (both sides): 216V / expected: 220V
-reg Regulator Board (both sides): 0V 0V / expected: 0V
Kreg Regulator Board (both sides): 10.09V 9.76V / expected: 8-12V

Title: Re: Help with final voltage check
Post by: Paul Birkeland on May 21, 2024, 06:43:02 AM

I don't see anything particularly concerning with these.