Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: riskybusiness on November 21, 2024, 07:02:53 PM

Title: issues with resistance check [resolved]
Post by: riskybusiness on November 21, 2024, 07:02:53 PM

Hello,

finished my crack build but when applying the resistance check I am getting the wrong measurements. for instance when black lead on u12 and testing the ground my values are 1.35ohms, and when testing u12 and terminal 3 value is 1.32 ohms. what can be my issue?

thank you

Title: Re: issues with resistance check
Post by: Tom-s on November 21, 2024, 07:23:08 PM

If you touch your test leads together. What's the resistance it reads?

Title: Re: issues with resistance check
Post by: riskybusiness on November 21, 2024, 07:34:03 PM

ok yes, i get the same value of 1.37ohms

Title: Re: issues with resistance check
Post by: Tom-s on November 21, 2024, 08:22:31 PM

Hope this helped and you can now safely continue your journey with the Crack.

Good luck!

Title: Re: issues with resistance check
Post by: riskybusiness on November 21, 2024, 09:20:10 PM

Yes it did. Thanks