Bottlehead Forum

Bottlehead Kits => Eros Phono => Topic started by: Allen on November 23, 2024, 08:52:25 AM

Title: 37.4 ohm resistor ID
Post by: Allen on November 23, 2024, 08:52:25 AM

Before I trim and solder this, this is where I use these substitute resistors, correct?

Thank you for the patience with my rookie questions,

--Allen

Title: Re: 37.4 ohm resistor ID
Post by: Paul Birkeland on November 23, 2024, 05:57:36 PM

If you aren't certain about the value, you can always double check it with your meter.

Title: Re: 37.4 ohm resistor ID
Post by: maarten on November 24, 2024, 07:39:15 AM

I had the same replacements, yes