Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: tvr2500m on January 20, 2025, 07:15:46 PM

Title: Parts Upgrade - Electrolytic to Film, Polarity?
Post by: tvr2500m on January 20, 2025, 07:15:46 PM

In my "upgraded" Crack build, I got two Audyn 100uf 400V film capacitors to replace the two Lelon 100uf 160V electrolytic capacitors. The electrolytics are polarized, the film caps aren't. Is there anything to do, consider here? Just connect them in any orientation to the same locations as the electrolytics?

Thanks.

Title: Re: Parts Upgrade - Electrolytic to Film, Polarity?
Post by: Paul Birkeland on January 21, 2025, 05:27:56 AM

Quote from: tvr2500m on January 20, 2025, 07:15:46 PM

Just connect them in any orientation to the same locations as the electrolytics?

That's the long and the short of it.

Title: Re: Parts Upgrade - Electrolytic to Film, Polarity?
Post by: tvr2500m on January 21, 2025, 06:12:22 AM

Thanks, Paul. That's easy enough.