Bottlehead Forum

Bottlehead Kits => Moreplay => Moreplay Upgrade => Topic started by: Thermioniclife on March 06, 2025, 06:43:27 AM

Title: Ping PB.regarding new taper Alps 10 k volume pot.
Post by: Thermioniclife on March 06, 2025, 06:43:27 AM

Hey PB  I noticed there is an addendum to the Moreplay upgrade kit, I had an ALPS tech spec taper chart alas I cant find it now. I would like to use a motorized volume pot. I have an ALPS 048g 10 kax2 motor pot would that be acceptable? It's from a failed/abandoned project.

Title: Re: Ping PB.regarding new taper Alps 10 k volume pot.
Post by: Paul Birkeland on March 06, 2025, 06:48:53 AM

I suspect it would fit the board, you'll just have to figure out the remote sensor and power. 

Title: Re: Ping PB.regarding new taper Alps 10 k volume pot.
Post by: Thermioniclife on March 06, 2025, 07:40:38 AM

I can figure out the power and also the remote control, as I understand the upgrade board uses Dc I guess the question is what the custom taper that you are waiting for. Does that taper differ than the pot I  have?

Title: Re: Ping PB.regarding new taper Alps 10 k volume pot.
Post by: Paul Birkeland on March 06, 2025, 10:47:08 AM

KA is a log pot, which is what's desired for the volume control.

Title: Re: Ping PB.regarding new taper Alps 10 k volume pot.
Post by: Thermioniclife on March 06, 2025, 11:51:20 AM

Thanks PB.