Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Seduction => Topic started by: matthewmckay on April 04, 2011, 10:10:52 AM

Title: Seduction w\ auricap substitution
Post by: matthewmckay on April 04, 2011, 10:10:52 AM

Hello,

So I am building a seduction...  I am replacing the interstage and output capacitors with auricaps.  I would assume that the orientation of these are important, but I have no idea what I am doing other than solder this to that and move on.  Does anyone know what position I should attach the black lead of the auricaps to for both the interstage and output caps?  Any insight would be appreciated.

Matt

Title: Re: Seduction w\ auricap substitution
Post by: coca on April 04, 2011, 10:47:39 AM

In all coupling applications, the black lead is the input, and the red lead is the output for the AURICAP.

Bernie.

Title: Re: Seduction w\ auricap substitution
Post by: Grainger49 on April 04, 2011, 11:38:53 AM

Here is the "official" link.  The orientation is called out for both a power supply and for coupling two tube stages:

http://www.audience-av.com/capacitors/a_applications.php

Title: Re: Seduction w\ auricap substitution
Post by: matthewmckay on April 04, 2011, 11:44:35 AM

Awesome!  Thankyou for the quick response.