Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Paramount => Topic started by: shelby1420 on April 05, 2011, 04:09:27 AM

Title: Location of RCA Jack and Speaker Binding Posts
Post by: shelby1420 on April 05, 2011, 04:09:27 AM
Hey guys, thinking of moving the binding posts and RCA jack on each of my Paramounts to the rear of my amplifiers, same area just facuing the rear instead of from the top plate, will this cause noise issues??  Seems like there is a lot of room under there that I could tuck them back there far enough away from the FC , thoughts??
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: Paul Joppa on April 05, 2011, 06:14:46 AM
I would not expect any issues; the inputs are well shielded and the outputs are high signal, low impedance, and twisted - not sensitive to interference.
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: shelby1420 on April 05, 2011, 08:20:51 AM
Most excellent, thanks Paul!!!!
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: shelby1420 on April 07, 2011, 04:58:09 AM
I would not expect any issues; the inputs are well shielded and the outputs are high signal, low impedance, and twisted - not sensitive to interference.

Well they are done and look smokin!!!!  I used a 5/8ths Forstner bit and left about 1/8th of an inch through the wood at the back unsoldered and then re solder the RCA jack and binding posts off the back and they all look great, I really like not having them on the top like that, now for my power cords to come in and that will be it!!!
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: Grainger49 on April 07, 2011, 07:38:19 AM
How about a picture or two in the Gallery?
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: shelby1420 on April 07, 2011, 09:00:16 AM
Will do, have to figure out how to do that mind you...............
Title: Re: Location of RCA Jack and Speaker Binding Posts
Post by: Grainger49 on April 07, 2011, 09:51:56 AM
I will give you the secret handshake.  When posting put in the text into the "Quick Reply" window, then hit "Preview" below the "Quick Reply" window.  In the "Preview" window on the lower left there is an "Additional Options" key to hit. The bottom one is to attach pictures.  You can upload from your computer if the file is not too big.

Will do, have to figure out how to do that mind you...............