Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Foreplay III => Topic started by: Natural Sound on December 04, 2009, 11:13:46 AM

Title: RCA extenders
Post by: Natural Sound on December 04, 2009, 11:13:46 AM

I know this has been discussed before but I'm unable to lacate it in the archive. If using 90 degree connectors on interconnects, like the NAWA, there is an obstruction of one of the three input connectors. I thought someone came up with an extender that raised the connector so there is enough clearance above the lower connector. I'd like to impliment a fix like this if someone could point me in the right direction.

Thanks in advance
Tom

Title: Re: RCA extenders
Post by: Tubejack on December 06, 2009, 01:45:36 PM

Scroll down the page for 'Nesting RCA plugs'

http://www.audiogear.com/Audio-Adapters-RCA-Plugs.html (http://www.audiogear.com/Audio-Adapters-RCA-Plugs.html)

Title: Re: RCA extenders
Post by: Grainger49 on December 07, 2009, 09:30:25 AM

That's too cool.  The top of my Foreplay is a mess with 4 sets of cables.  I bookmarked the page.

Title: Re: RCA extenders
Post by: Natural Sound on December 07, 2009, 04:17:32 PM

Quote from: Tubejack on December 06, 2009, 01:45:36 PM

Scroll down the page for 'Nesting RCA plugs'

http://www.audiogear.com/Audio-Adapters-RCA-Plugs.html (http://www.audiogear.com/Audio-Adapters-RCA-Plugs.html)

That should work quite nicely, and reasonably priced too. Thanks, Tubejack.