Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Topic started by: Jim R. on June 02, 2012, 05:33:54 AM

Title: Design notes, check-out values and schematic for SR45s?
Post by: Jim R. on June 02, 2012, 05:33:54 AM

Hi PJ,

Well, I just bought Doc's SR 45 amps and if it is possible, I'd like to get all the necessary supporting design notes and resistance and voltage check values and points and any other documentation you may have for these amps.  I realize that these amps have no formal manual and that info may be sparse, but whatever you have would be appreciated.  Also, how much of the circuit remains from the paramour II?  I do have that manual

Thanks,

Jim

Title: Re: Design notes, check-out values and schematic for SR45s?
Post by: Paul Joppa on June 02, 2012, 06:46:05 AM

I have a circuit, and the preliminary design notes. I can't be sure that the amp you have is exactly what my notes describe; the documentation was created before the construction and that was five years ago.

Send me your email through the Forum and I'll pass them on to you. Circuit will be a .gif and the notes are Word97 format.

Title: Re: Design notes, check-out values and schematic for SR45s?
Post by: Jim R. on June 02, 2012, 06:57:20 AM

Paul,

PM sent.

Thanks,

Jim

Title: Re: Design notes, check-out values and schematic for SR45s?
Post by: howardnair on June 03, 2012, 12:55:18 AM

jim--congratulations on buying those-i was thinking about them but that is all i was doing--i know i missed a good opportunity to own something special--enjoy----howie

Title: Re: Design notes, check-out values and schematic for SR45s?
Post by: Jim R. on June 03, 2012, 10:27:58 AM

Thanks Howie!  Yup, very much looking forward to these!

-- Jim