Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: denti alligator on September 12, 2012, 03:40:13 PM

Title: build query
Post by: denti alligator on September 12, 2012, 03:40:13 PM

I've built two more complicated kits, so it's hard to believe I'm mucking this one up, but I am.

I already messed up getting the batteries mounting underneath instead of on top. "Just flip it over!" Yeah, except I used a sharpie to label the terminal strips on the chassis. [doh!]

Anyway, the first soldering I've done I mixed up U and L, upper and lower parts of the terminal strip. Dunno why, just did. This won't really make a difference, though, right?

Title: Re: build query
Post by: Noskipallwd on September 12, 2012, 04:34:42 PM

They are all connected(top and bottom) so your o.k. there. IIRC none of the terminals on mine were jam packed like they can be in some kits, so roomwise you should be allright as well.

Cheers,
Shawn

Title: Re: build query
Post by: karl on September 16, 2012, 02:00:19 PM

Goo Gone will remove Sharpie ink.

Regards,

Karl

Title: Re: build query
Post by: denti alligator on September 16, 2012, 04:26:53 PM

Good to know, but at this point it would require a complete disassemble and reassemble.