Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Seduction => Topic started by: balancedtriode on October 04, 2012, 03:54:36 AM

Title: I screwed up :/ help please!
Post by: balancedtriode on October 04, 2012, 03:54:36 AM

I was working on the power supply of my seduction and unknowingly dripped solder from terminal 25 to the chassis plate creating a short
I turned it on and the power supply sparked
I quickly shut It down and I am trying to find out what I need to replace.
are there any obvious suggestions for me to test or parts to replace,
any info would be appriciated
thanks,
coltrane

Title: Re: I screwed up :/ help please!
Post by: balancedtriode on October 04, 2012, 04:19:16 AM

HA! fixed it should have
 waited to ask
thanks anyways

Title: Re: I screwed up :/ help please!
Post by: Grainger49 on October 04, 2012, 04:39:50 AM

T25 to ground shorts the diodes only.  So if they are all good, you are good.  The capacitors shouldn't be affected.  Do check each diode.  Verify the voltage at T25.  It should be 160V DC.