Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Paramount => Topic started by: vetmed on November 27, 2012, 05:44:32 PM

Title: Output impedance
Post by: vetmed on November 27, 2012, 05:44:32 PM

I don't have my assembly manual handy, can I set the output to 16 ohms?

TIA

Robert Lees

Title: Re: Output impedance
Post by: Paul Joppa on November 27, 2012, 06:17:01 PM

Yes.

Title: Re: Output impedance
Post by: vetmed on November 28, 2012, 06:08:45 AM

Thanks Paul, I'm considering the purchase of a pair of Quad 57 and it seems they work best with the 16 ohm tap.



Robert Lees

Title: Re: Output impedance
Post by: Paul Joppa on November 28, 2012, 07:16:18 AM

Here's a switch so you can try them all. It calls for a 3-position, 2-pole switch. I fit one in next to the output binding posts on an early prototype.