Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Seduction => Topic started by: KMokc on December 04, 2012, 04:02:14 AM

Title: Dynavector 10X5 Cartridge
Post by: KMokc on December 04, 2012, 04:02:14 AM

New to the Bottlehead lifestyle. Just purchased a Seduction Phono Pre-Amp and would like to know if anyone has used a Dynavector 10X5 cartridge with it? If so any probs dislikes?

Thanks in advance for any help.

Kevin

Title: Re: Dynavector 10X5 Cartridge
Post by: debk on December 04, 2012, 04:12:51 AM

The seduction product page says it will work with cartridges with an output of 2.5mV or higher. The 10x5 is a high output MC with an output of 2.5mV so it should work.

I have the same cartridge but and using it with the Eros, and am very happy with it

Debra

Title: Re: Dynavector 10X5 Cartridge
Post by: 4krow on December 04, 2012, 09:55:28 AM

For what it's worth, many years ago, I also owned this cartridge. Maybe it was just the synergy with my system, but I have NEVER heard better yet. It is a clear sound that I look for in cartridges. So many times, they sound a little fat to me.

Title: Re: Dynavector 10X5 Cartridge
Post by: saildoctor on December 04, 2012, 10:47:13 AM

FWIW I use a 2.8V dynavector cartridge with my Seduction and it does have plenty of gain for my FPIII/Paramount system.