Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Mikhail Vorozhtsov on January 17, 2013, 07:09:08 PM

Title: Crack power requirements
Post by: Mikhail Vorozhtsov on January 17, 2013, 07:09:08 PM

Hello,

What is the maximum current Crack (with Speedball) can draw from 220V mains? I'm selecting an isolation transformer for an "emi-filter + isolation + balanced power" box (recommendations are welcome!), will I be safe with a 300VA rated one (assuming it will also power a DAC (25VA))?

Title: Re: Crack power requirements
Post by: Paul Birkeland on January 17, 2013, 07:28:12 PM

Hello Mikhail,

50VA should be more than sufficient for the Crack.

Title: Re: Crack power requirements
Post by: Mikhail Vorozhtsov on January 17, 2013, 07:33:45 PM

Thanks.