Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: adamct on February 04, 2013, 06:37:29 AM

Title: High impedance headphones suitable for use with Crack
Post by: adamct on February 04, 2013, 06:37:29 AM

I'm aware of the following high-impedance headphones:

Sennheiser
HD800 (300 Ohms)
HD700 (150 Ohms)
HD650 (300 Ohms)
HD600 (300 Ohms)
HD580 (300 Ohms)

Beyerdynamic
T1 (600 Ohms)
T70 (250 Ohms)
DT990 (600 Ohms)
DT990 (250 Ohms)
DT880 (600 Ohms)
DT880 (250 Ohms)
DT770 (600 Ohms)
DT770 (250 Ohms)

AKG
K240 Sextett (600 Ohms)

Is anyone aware of any others? I've heard just about all of the above except for the T70s and the Sextetts. I'm trying to figure out what other cans might be a good match to the Crack.

Best regards,
Adam

Title: Re: High impedance headphones suitable for use with Crack
Post by: Paul Birkeland on February 04, 2013, 06:48:38 AM

http://www.bottlehead.com/smf/index.php?topic=546.0 (http://www.bottlehead.com/smf/index.php?topic=546.0)

Title: Re: High impedance headphones suitable for use with Crack
Post by: adamct on February 04, 2013, 07:25:35 AM

Well...that should do it! Is there a way to delete this thread? Don't want to clog stuff up when there is already a perfectly good resource...

Title: Re: High impedance headphones suitable for use with Crack
Post by: adamct on February 04, 2013, 07:30:59 AM

Actually...does anyone know if any of the high impedance AKGs other than the Sextett are any good, relative to the Sennheider HD600 or Beyer DT990 600 Ohms?