Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: bugeyes on March 01, 2013, 06:42:07 AM

Title: quickie 1.1 PJCCS typo?
Post by: bugeyes on March 01, 2013, 06:42:07 AM

Was wondering if the following are typos in the manual;
1.connect OA to B6...., wouldn't it be OB to B6 since OA is already connected to A2 on the A side of the circuit.
2.B6 is already connected to 6L...., if the circuit is symmetrical, the A side has OA going to A2 which is an unoccupied pin on the tube socket. Seems to reason OB should go to B2, is this correct ??? 
 If I am reading the schematic right, seems the pins 2 and 6 are basically the same connection?

Title: Re: quickie 1.1 PJCCS typo?
Post by: bugeyes on March 01, 2013, 11:51:53 AM

I went ahead and just used the schematic and it fired up just fine. I would suggest that maybe you would want to clarify the previous points ;D

Title: Re: quickie 1.1 PJCCS typo?
Post by: Paul Birkeland on March 01, 2013, 05:54:14 PM

It should be OB to B6, we'll get that corrected.