Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Topic started by: vanofmonks on March 18, 2013, 03:51:41 PM

Title: Paramour 1 TF heater specs
Post by: vanofmonks on March 18, 2013, 03:51:41 PM

Can the Paramour 1 transformer with the solder tabs handle 1.2A AC on the 6.3v heater taps?  There would only be 1a AC on the 2.5v taps.

Thanks,
Chris

Title: Re: Paramour 1 TF heater specs
Post by: Paul Joppa on March 18, 2013, 06:21:05 PM

Is that the PT-2? If so, the 6.3v winding is spec'd at 1.2 amps.

Title: Re: Paramour 1 TF heater specs
Post by: vanofmonks on March 19, 2013, 03:32:45 AM

It sure is a pt-2.  Guess I should have actually looked at the label, because it states the specs.

Thanks

Chirs