Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: ashneel on March 21, 2013, 08:48:00 AM

Title: Resistance Check
Post by: ashneel on March 21, 2013, 08:48:00 AM

I recently installed an ALPS pot on my Crack ( I have no idea if its because of that) . Voltages check are all ok..Resistance checks are all pinpoint except for the Center Pin resistance check.
In the manual, it it stated they should be between 90K Ohms-100K Ohms. I am getting 105K Ohms and 106K Ohms..

Should I worry about that ? Someone please help..

Title: Re: Resistance Check
Post by: adamct on March 21, 2013, 09:47:08 AM

No, that should be fine.

Title: Re: Resistance Check
Post by: ashneel on March 21, 2013, 10:01:17 AM

Thanks for the help mate..I was worried that it may cause imbalence. It didn't..