Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: wullymc on April 08, 2013, 02:05:55 PM

Title: PJCCS done for Quickie 1.1 - question voltage
Post by: wullymc on April 08, 2013, 02:05:55 PM

Hi there,

I have just complete the upgrade and have the following voltages:

Terminal.        Voltage.     My Reading
IA/IB.            37-38 V.        36.2V/36.2
A6/B6.            19-21V.        23.1V/23.4V
A5/B5.          Roughly 2V.      1.7V/1.7V

This is on a Quickie 1.1.   I have about 4 hours on my batteries.  I think I should be alright but just wanted to check.

I am concerned about the voltages for A6 and B6 and that they are higher than. They should be.....should I be worried?....or do you have any suggestions of a place to look to bring this down?

Thanks so much.
Take care...Dave

Title: Re: PJCCS done for Quickie 1.1 - question voltage
Post by: Doc B. on April 08, 2013, 03:21:42 PM

Don't worry, be happy.

Title: Re: PJCCS done for Quickie 1.1 - question voltage
Post by: wullymc on April 08, 2013, 04:11:10 PM

Perfecto!!!

Thanks Doc!!  Thanks for bringing these wonderful kits to my life.  I am having so much fun building them....my confidence is slowly growing with building these kits.

Just tried it and everything worked just great.  I can really notice the sound difference.  It just amazes me!


..now onto building a wooden base for it!...exciting times!

...then the Speedball upgrade for my Crack

Take care...Dave