Bottlehead Forum

General Category => General Discussion => Topic started by: juloc on September 03, 2013, 04:52:02 AM

Title: Wrong crack transformer
Post by: juloc on September 03, 2013, 04:52:02 AM

I did a faulty order and got a 240 V transformer instead of the 120 V I really need (I suppose I checked the 240 V cell by mistake). I noticed this when the kit was assembled and voltage measures were too low. The amp is working but volume is too low. What can I do? Should I use a step-up converter (120 to 240) or is it better to install the right transformer. I emailed to [email protected] asking for the 120 V transformer but my messages were rejected.

Thanks for your help

Title: Re: Wrong crack transformer
Post by: Grainger49 on September 03, 2013, 05:49:40 AM

Bottlehead has the spam filter set pretty tight.  Give them a call.  The number is on this page:

http://www.bottlehead.com/contu/cntu.html

Title: Re: Wrong crack transformer
Post by: Paul Birkeland on September 06, 2013, 05:41:23 AM

You can purchase a replacement 120V transformer from us, just give us a ring. 

-PB