Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: crgolfer on September 05, 2013, 04:18:12 AM

Title: Crack build question
Post by: crgolfer on September 05, 2013, 04:18:12 AM

When doing the final voltage test on the headphone TRS jack my voltage does not drop all the way to zero.  It drops to about .02 to .04 volts.  Is necessary to get a zero reading or is this ok?  All the other resistance and voltage readings check out.

Title: Re: Crack build question
Post by: audiophileboss on September 05, 2013, 05:20:22 AM

Thats fine. No need to woory. Best test is to plug in some headphones and play some music. If it works your fine