Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: EniGmA1987 on October 05, 2013, 10:04:09 AM

Title: Transformer wiring
Post by: EniGmA1987 on October 05, 2013, 10:04:09 AM

I was building my new Crack kit that I just received and it says to solder the "line" wire to transformer pin 1, and the "neutral" wire to transformer pin 2. However on the transformer itself it says pin 1 is "0v" and pin 2 is "120v", which seems to be labelled oposite of how the manual says to wire things. Is the manual's wiring correct or should I be following how the transformer is labeled?

Title: Re: Transformer wiring
Post by: Paul Birkeland on October 05, 2013, 12:01:38 PM

Follow the manual and the terminal numbers it specifies.

The voltage labels on the power transformer sticker are somewhat arbitrary.