Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Tonydatigerr on January 24, 2014, 08:27:22 PM

Title: Crack build problem [Solved]
Post by: Tonydatigerr on January 24, 2014, 08:27:22 PM

Hey guys, just got my crack today and I'm super excited for it! However, I have run into a problem on page 14 of the manual where the terminal strips are supposed to be secured onto the screws going through the power transfer. The issue is that the screws are too large for the holes in the strip and I can't seem to find my power drill - is there anything else that I can do to remedy this? Thanks all :)

Title: Re: Crack build problem
Post by: Paul Birkeland on January 24, 2014, 08:33:01 PM

See the first instruction/first photo on page 14. There is a self tapping screw included with the kit to cut threads into these terminal strips.

Title: Re: Crack build problem
Post by: Tonydatigerr on January 25, 2014, 07:17:35 AM

Oh wow... I'm blind. Thanks for the help!