Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Stereomour => Topic started by: Bartguy on March 02, 2014, 06:34:41 AM

Title: Stereomour terminal 5 & 6 Voltages transposed
Post by: Bartguy on March 02, 2014, 06:34:41 AM

Hi, just completed my build. All resistances & voltages are good, except for T5-- which the manual says should read 0 actually reads 64.72 and T6 which the manual says should read 60 actually reads .001.

Looks like the connections are correct, too. Is this my mistake or did the manual get them switched?

Thanks.

Title: Re: Stereomour terminal 5 & 6 Voltages transposed
Post by: fullheadofnothing on March 02, 2014, 09:41:24 AM

There was a version of the manual kicking around for a brief time that had these transposed. Did you get your kit recently? What is the date of the manual file name?

Title: Re: Stereomour terminal 5 & 6 Voltages transposed
Post by: Bartguy on March 02, 2014, 11:12:44 AM

My manual pdf is dated 09-23-13

Title: Re: Stereomour terminal 5 & 6 Voltages transposed
Post by: Bartguy on March 03, 2014, 03:48:42 AM

Looks like it was transposed since I saw the same issue in another thread. Don't know why that thread didn't show up in my search. It's playing music.