Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Seduction => Topic started by: debk on April 02, 2010, 12:22:07 PM

Title: Building Seduction with C4S
Post by: debk on April 02, 2010, 12:22:07 PM

Just received my Seduction and CS4 kit.  Looks like a great kit, the instructions are very well written.  I can't wait to dig into it.  One question I have. Should you build the Seduction kit stock and then modify it with the CS4, or just make the modifications as you are building the Seduction?

Thanks

Debra

Title: Re: Building Seduction with CS4
Post by: Paul Joppa on April 02, 2010, 01:00:14 PM

I always suggest building it stock first. It's much easier to debug if there are any problems, and it's well worth your time to hear the difference the C4S makes - all part of the educational benefit of a kit!

Title: Re: Building Seduction with CS4
Post by: Paul Birkeland on April 02, 2010, 01:02:22 PM

I would build it stock first. That way you can know 100 percent that you have a good, working platform. After a few days of living with it in stock form, then go for the upgrade installation. Only a few resistors need to be removed for the upgrade, so there isn't a huge advantage to building it all in one shot. 

Title: Re: Building Seduction with CS4
Post by: Grainger49 on April 02, 2010, 01:26:37 PM

Another thing that you get is the knowledge of what the C4S does for you.

Title: Re: Building Seduction with C4S
Post by: debk on April 02, 2010, 02:45:39 PM

That is what I thought.  I will build it stock first.

Thanks for your quick responses

Debra