Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Strikkflypilot on April 11, 2014, 05:29:05 AM

Title: Terminal 13 resistance question
Post by: Strikkflypilot on April 11, 2014, 05:29:05 AM

Hi guys.
Just finished build today.
All resistances ok except nr 13.
I get around 5 M Ohm, counting downward in in 10kOhm decrements
Until it reaches about 2 MOhm, when it suddenly starts slowly counting upwards from
about 170kOhms.
Only deviation from design has been the connection to 14u instead of 22L
On page 19.
Thoughts?

Title: Re: Terminal 13 resistance question
Post by: Paul Birkeland on April 11, 2014, 05:33:38 AM

The "*" on that value signifies that it will vary a lot from meter to meter.  As long as you don't get 0 Ohms, you're OK to move on.

Title: Re: Terminal 13 resistance question
Post by: Strikkflypilot on April 11, 2014, 05:59:46 AM

Wow that was fast!
Thanks!