Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: hardisondan on July 21, 2014, 03:38:33 PM

Title: Crack Parts List
Post by: hardisondan on July 21, 2014, 03:38:33 PM

I have to buy some replacement resistors for my Crack kit. Hopefully my local electronics place (Jaycar) will have them.

I want to make sure I ask for the right thing. I notice in the parts list it say 21.1K ohm 3/4W, but in the build instructions it refers to it as 22.1k ohm 1W. How important is it?

Cheers
Dan

Title: Re: Crack Parts List
Post by: Paul Birkeland on July 22, 2014, 04:07:13 AM

Hello Dan,

That part carries multiple wattage rating on the datasheets, so the differences in nomenclature aren't super surprising.

A 1W rating would be ideal, .75W is sufficient. 

-PB