Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: davemessina on August 10, 2014, 01:44:49 PM

Title: what to do with lock washers on binding posts?
Post by: davemessina on August 10, 2014, 01:44:49 PM

Hi all,

My speaker binding posts came with

- 2 flat washers on each post
- 2 black lock washers on each post
- 2 nuts on each post

in that order from inside (plate side) to out.

The instruction manual makes no mention of the lock washers. (For that matter, it doesn't mention the second flat washer, either.)

Could someone please advise on:

- what to do with these extra parts
- what the correct order of assembly is?


Many thanks!
Dave

Title: Re: what to do with lock washers on binding posts?
Post by: 2wo on August 10, 2014, 05:10:08 PM

 I'd go Lock washer,flat washer-plate-flat washer, lock washer, nut...John

Title: Re: what to do with lock washers on binding posts?
Post by: Paul Birkeland on August 10, 2014, 06:37:21 PM

You can discard the extra sets of parts.

-PB

Title: Re: what to do with lock washers on binding posts?
Post by: davemessina on August 11, 2014, 07:52:06 AM

Thanks to you both for the replies!