Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: AudioDave on September 14, 2014, 11:17:04 AM

Title: BeePree Assembly question
Post by: AudioDave on September 14, 2014, 11:17:04 AM

Hope this isn't a stupid question but it isn't clear to me.  On page 28 of the BeePree assembly manual for the last assemblt step of the filament regulator boards it says to "take a cutoff piece of lead....."     Does that mean take a piece of solder?
Thanks for your help!
Dave

Title: Re: BeePree Assembly question
Post by: Paul Birkeland on September 14, 2014, 11:17:52 AM

Hello Dave,

No, a piece of cut off metal from a resistor or capacitor.  (like a piece of wire with no covering)  Sometimes I wish we had a few more words in the English language.

-PB

Title: Re: BeePree Assembly question
Post by: AudioDave on September 14, 2014, 11:27:47 AM

Thank You Sir!!