Bottlehead Forum

General Category => General Discussion => Topic started by: JamieMcC on September 25, 2014, 06:09:46 AM

Title: Speedball product page
Post by: JamieMcC on September 25, 2014, 06:09:46 AM

I noticed the Speedball product page needs tweaking some text is showing which looks like it should be hidden located below the product picture.

"This is the name of the button 3. After

is the section between the two lines under the tabs, change any text that is in between span brackets i.e. TYPE HERE the span classes change the color and size of the text relatively “undertabog” is orange, “undertabwht” is white, “undertabylw” is yellow. Do not delete brackets EVER, and to add more than one space field add:   To make bullet points use • These are html code for special charachters. Always close tags with a slash like this: --> "

Title: Re: Speedball product page
Post by: Natural Sound on September 25, 2014, 06:37:26 AM

I noticed that on the SEX page the other day. I suspect there are more.

Title: Re: Speedball product page
Post by: fullheadofnothing on September 25, 2014, 06:51:52 AM

We recently asked our web guy about changing where it says "Specs" to "More" since the "Specs" section is where most of the info is, but by calling it that, it sounds like it's just some S/N measurements and stuff. My guess is he started playing with the style sheet and accidentally un-commented something.

Title: Re: Speedball product page
Post by: mcandmar on September 25, 2014, 08:03:23 AM

Might i suggest you separate the Technical info and specs from the Impressions into separate tabs.

For example the Paramount and Stereomour pages are nicely laid out, good underside photo with the techie info and specs clearly laid out while keeping the "Impressions" separated into a section below. The S.E.X. and Crack pages however are a bit of a hodge podge with no consistency between them.  Basically use the same template for all products.

And just to be picky, the Mainline page is missing an underside photo, and a big high res photos of the amps wouldn't hurt either. i.e. When you open a product page and click on the image of the amp it opens the same small image in a window, that should really be a full screen image.

Please take the above as constructive criticism.  I'm more of a show me some pics and technical specs kind of guy and couldn't care less what somebody on HeadFi thinks :)

Title: Re: Speedball product page
Post by: fullheadofnothing on September 25, 2014, 09:05:23 AM

Our man in Arizona cleared it up. It was quite possibly my fault. If someone can find a way to blame Peebs, I'm all ears...

Title: Re: Speedball product page
Post by: Paul Birkeland on September 25, 2014, 11:05:54 AM

Quote from: fullheadofnothing on September 25, 2014, 09:05:23 AM

If someone can find a way to blame Peebs, I'm all ears...

You'll note that I have tactfully declined access to such things (for now).

-PB

Title: Re: Speedball product page
Post by: Doc B. on September 25, 2014, 11:07:40 AM

When did I ever worry about having a reason in order to blame you for something?