Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: zlobby on October 22, 2014, 06:38:51 AM
-
Finally got a couple parts from Eileen to get my speedball back up and running. Everything seems OK, but there were two voltages that were concerning when I was doing the tests. They were on terminals 19 and 20
19 should be 0, i read 77. 20 should be 206, I was getting 0. All the other voltages were OK.
-
Hi I have a feeling these two readings are typos in the speedball manual there was a sticky regarding it on the Crack page but I am unable to locate it. Wait for confirmation from one of the bottlehead gurus
-
OK found it via a search don't know why it was not showing for me in the sticky section
http://bottlehead.com/smf/index.php?topic=1398.0
Speedball correction
« on: December 30, 2010, 12:12:43 am »
Quote
Here's a typo that managed to sneak in from an early version of the Crack manual due to a copy and paste error:
In the voltage check on page 29, Terminal 20 should read 0VDC and terminal 21 should read 206VDC. Terminal 19 is not a relevant measurement.
-
GREAT! Then the rest of my voltages are within 5%. Time to plug this puppy in!