Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: r1c0rtez on December 30, 2014, 09:01:10 AM

Title: 270k resistor confusion[solved]
Post by: r1c0rtez on December 30, 2014, 09:01:10 AM

I tried to read the whole manual at least twice before assembly but am still confused and even cut both 270k resistor leads prior to running " 270k resistor" (or is it a specific i.e. long lead 270k) through 13u and 12u

would it be equivalent to running this blue jumper wire through the terminal holes?

Title: Re: 270k resistor confusion
Post by: r1c0rtez on December 30, 2014, 09:25:32 AM

figured it out, an easily over read and glazed over photo.

instructions ask for 270w

not 270K

Title: Re: 270k resistor confusion
Post by: Paul Birkeland on December 30, 2014, 10:42:15 AM

Where is that blue wire going?

Title: Re: 270k resistor confusion
Post by: r1c0rtez on December 31, 2014, 11:19:58 AM

It WAS going to be jumpered to go to 14u i believe, but i reread the instructions and realized it  was asking for a lead of the 270w resistor and not the 270k the blue wire was being jumpered from.

The blue wire was never jumpered and cut immediately