Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: thdewitt on January 27, 2015, 06:39:21 PM

Title: 100K Goldpoint Potentiometer
Post by: thdewitt on January 27, 2015, 06:39:21 PM

Hello,  just checking.  I have a 100k Goldpoint Custom Potentiometer.  I can just drop this in to the BeePre correct.  I read a previous post that both of Volume and Balance pots are 100K and that together they are 50K.  Does that make sense.  Want to drop this in tomorrow if that is correct.

Thanks,
Tom

Title: Re: 100K Goldpoint Potentiometer
Post by: Paul Birkeland on January 28, 2015, 06:20:29 PM

You could replace the 100K level control with the Goldpoint level control.  If you opt for the BeeQuiet upgrade, the Goldpoint will need to be removed.

-PB

Title: Re: 100K Goldpoint Potentiometer
Post by: thdewitt on January 29, 2015, 07:03:42 AM

Thanks, I was just going to put in a gold point volume control and selector switch so that I didn't lose the balance control.  My room is set up in such a way that the balance is very helpful.

Tom

Title: Re: 100K Goldpoint Potentiometer
Post by: thdewitt on January 29, 2015, 10:36:04 AM

Installed the potentiometer and the Selector Switch.  The BeePre is very sensitive and at higher volume you can here the potentiometer as it moves from setting to setting.

Tom