Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: JBH on February 20, 2015, 03:54:48 PM

Title: Another rookie in need of voltage check assistance.
Post by: JBH on February 20, 2015, 03:54:48 PM

I am building the 120V version of the kit.
All resistance checks were great.
All of my voltage checks above zero were correct, but I have a few spots that should be at 0V which are slightly above.

Terminal 6: hops around in the 20-50 mV range
Terminal 10: hops around in the 5-20 mV range
Terminals 12, 14, A4, A5, B7 and B8 are all -1 mV.

Are these values okay?  Are they at all indicative of a specific problem?

Title: Re: Another rookie in need of voltage check assistance.
Post by: Doc B. on February 20, 2015, 04:26:43 PM

Those are fine.

Title: Re: Another rookie in need of voltage check assistance.
Post by: JBH on February 20, 2015, 05:11:52 PM

Thanks Doc! Time to listen!