Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: jorgen83 on March 15, 2015, 03:05:24 AM

Title: Resistance check (terminals 6 & 10) [resolved]
Post by: jorgen83 on March 15, 2015, 03:05:24 AM

I just finished my build, and all resistances are correct, except for terminal 6 and 10, which both come up as 0 ohm instead of 2.4 K ohms.

I did connect the open terminals of the jack plug to ground, perhaps that gives different readings?

Title: Re: Resistance check (terminals 6 & 10)
Post by: jorgen83 on March 15, 2015, 03:17:00 AM

Ah yes, so I just found the answer. 6 and 10 are shorted to ground so 0 is correct :)