Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Topic started by: Bill Epstein on March 30, 2015, 07:11:34 AM

Title: Ping: CB, 20dB Padding For Dummies
Post by: Bill Epstein on March 30, 2015, 07:11:34 AM

Since I have 1 years experience 15 times, please clarify:

 10K connecting 2 L&R OUTPUT lugs and 100K, 2 of them, each making the L and R INPUT connections? TIA

Title: Re: Ping: CB, 20dB Padding For Dummies
Post by: Paul Birkeland on March 30, 2015, 02:41:21 PM

Which product are you working on?

Title: Re: Ping: CB, 20dB Padding For Dummies
Post by: Paul Birkeland on March 30, 2015, 02:42:42 PM

Oh, now I remember, 100K dual pot on a preamp.

The 100K resistors go between the selector switch and the inputs to the pot.  The 10K resistors go from the inputs of the pot to ground.

No resistors connect to the outputs of the pot.

-PB

Title: Re: Ping: CB, 20dB Padding For Dummies
Post by: Bill Epstein on March 30, 2015, 02:44:25 PM

Quote from: Caucasian Blackplate on March 30, 2015, 02:42:42 PM

Oh, now I remember, 100K dual pot on a preamp.

The 100K resistors go between the selector switch and the inputs to the pot.  The 10K resistors go from the inputs of the pot to ground.

No resistors connect to the outputs of the pot.

-PB

That I understand. Thank you.